2x Telephoto lens – Part of the 4 in 1 Lens Set – Helps reduce the effects of pixilation. Distant subjects appear twice as near, so you won’t need to zoom in so much. Position the lens centrally over your camera using the clip or the magnetic rings.
Macro lens – Part of the 4 in 1 Lens Set – Only very close objects (1-2cms away) will come into focus. To increase the detail, use your zoom function. The macro lens unscrews from the back of the wide angle lens. Position the lens centrally over your camera using the clip or the magnetic rings.
Wide angle lens – Part of the 4 in 1 Lens Set – For 120 degrees of vision. Your subject will appear slightly smaller so you can see a lot more in your shot. Useful for landscapes & interiors where space is limited. Screw the macro lens onto the back of the wide angle lens before you start. Position the lens centrally over your camera using the clip or the magnetic rings.
Fisheye lens – Part of the 4 in 1 Lens Set – For an extreme 180 degrees of vision. This lens is ideal for architecture and unusual angles. Position the lens centrally over your camera using the clip or the magnetic rings.
4 Magnetic rings – Part of the 4 in 1 Lens Set – Peel off the backing paper and stick a ring around the camera on your phone, make sure it lays flat without blocking the lens or sensor. Position the lens centrally over the magnetic ring. There is a protective film which can be removed from the ring.
Lens covers – Are provided to protect your equipment from dust & scratches.
please note these lenses are not compatible with iPhones 6/6s/7/7plus/8/8plus/X /10 due to the location of the camera. A new compatible 4in 1 clip on set will be available shortly.
Shutter release – Press the appropriate button, IOS or Android, to take pictures or stop & start video recording. Insert the CR2032 battery + side up and replace the cover. Move the switch to the “on” position and wait for the LED light to flash quickly. On the phone you plan to use, activate the Bluetooth function. Pairing will complete once you have selected the shutter release from the list of available sources.
Device holder – Rest your phone in the holder and pull the sprung tab until it drops into place. Pull the tab again to release your phone. Use with items measuring between 5.5 and 8.5 cms. The holder has a standard ¼” thread compatible with the tripod and monopod. Larger clips are available too.
Tripod – Helps to eliminate camera shake when used with the device holder & shutter release. Enjoy hands free use of your phone. The height adjustable legs (13 to 21 cms) have non-skid feet to help with stability. The joint at the neck can be loosened, adjusted and tightened. The tripod can be used with most compact digital cameras. Use the digital compact camera’s self-timer with the tripod or monopod.
Hard Case – included for protection.
Check out the events page to find out where you can try before you buy.